Product Overview
The Air House 7 was design to perform similar to our air house 2, just more capacity. Have a Heavy Vehicle? The Air House 7 will lift it at about 25% less pressure. The added benefit is the Air House 7 will provide a softer ride at the same height compared to the Air House 2. With a slim 7" Max diameter it will fit in all of your applications where a "standard" 2600 lbs. bag will fit with room to spare.Best suited for your Control Arm Front suspension, or Link rear system where the bags are mounted on the bar to take advantage of leverage. Single bellow construction greatly increases the stability of the air spring allowing for increased angle and load applications without the banana center kick out.Maximum Outside Diameter when compressed is 7" and will shrink down to about 6 5/8" when inflated. Minimizing frame cutting in most applications. With the added stability there is a very noticeable reduction in vehicle "sway" compared to a typical double convoluted.
Specifications:
- 2" Collapsed Height
- 8.5" Extended Height
- 7" Max Diameter
- Available in 1/4", 3/8" and 1/2" NPT
- 3.25" - 5" Optimum Ride Height
- Up to 3300 Lbs. Force at 115 PSI
- Heavy Duty Thick Rubber Construction
- 615 PSI Tested Burst Pressure
- Front or Rear Installation
- Straight or Angled Installation
- Industry Standard Bolt Pattern
- Machined 6061 Aluminum Caps
Brand (Manufacturer) Info
Universal Air Suspension was established in the year 2000 built with the goal of manufacturing an air spring that will outperform all the others. The gamble has paid off as the company is now considered one of the industry’s primary manufacturers of air suspension accessories. One solid proof of this is that its Aero Sport is patented not just in the United States but also in Australia, Canada, and Japan.
Universal Air Suspension manufactures and distributes all its air suspension accessories in its 15,000 square feet facility in San Bernardino, California.