Chevrolet C-10 1963-1972 QA1 Rear Classic Truck Conversion Kit

Product Overview

Looking to keep your factory truck arms, but still want coil-overs for adjustable ride height? QA1's C10 bolt-on rear suspension system is designed to convert trucks originally equipped with a coil-spring rear suspension to coil-overs. This system integrates adjustability into multiple areas so you can truly fine-tune the geometry to create the perfect performance after lowering. By converting the coil-spring rear suspension to adjustable coil-overs, the ride height for each corner can be altered for that perfect stance. The adjustable panhard bar keeps the rear centered for more predictable cornering, and the multiple mounting locations correct roll center geometry based on the amount of drop. The coil-overs are also relocated to the outside of the frame rail, closer to the wheel, for better cornering stability and allowing room for popular aftermarket rear-mounted fuel tanks. In addition to being easily bolted on, the entire rear system can be installed without needing to remove the bed of the truck. Kits are available with or without QA1 tubular trailing arms and c-notch.

Fits: Chevrolet C-10 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972

Features:

Bolt-on Coil-Over Conversion: Transforms coil-spring rear suspension into adjustable coil-overs for improved handling and stance.
Up to 6" of Drop (with c-notch): Allows for precise control over ride height, providing an aggressive stance or a more subtle drop.
Tubular Truck Arms (optional): Features integrated pinion angle adjustment and allows for precise wheelbase setting without shims.
Relocated Coil-Overs: Positioned outside the frame rails for better cornering stability and clearance for aftermarket rear-mounted fuel tanks.
Made In USA

Includes:

Upper Coilover Brackets x2
Lower Coilover Brackets x2
Axle Brackets x2
Panhard Bar x1
Brace Bar x1
Coilover Shocks x2
Coilover Springs x2
Trailing Arms x2 (Optional)
Front Trailing Arm Brackets x2 (Optional)
C-Notch Brackets x2 (Optional)
Pinion Angle Adjuster Links x2 (Optional)
Mounting Hardware

Notes: C-notch only included if QA1 trailing arms are selected.

Brand (Manufacturer) Info

QA1 believes vehicles are meant to be driven. So from bolt-on products that can help you behind the wheel faster, to seasoned technicians that can help you handle curves with confidence, everything they do is aimed to get you out on the road. Whether your goal is an easy cruise down the street or a sprint across the checkered flag, QA1 has the driveline and suspension products you need to achieve the experience you want.

Warranty Information

QA1 warrants that the products will be free from defects in material and workmanship for one year from date of sale to the original purchaser. A limited lifetime warranty is offered on select shock absorbers. For registration and more information on the limited lifetime warranty, please visit www.QA1.net/Warranty. QA1 makes no other warranty of any kind, express or implied. QA1 shall have no obligation under the foregoing warranty where the defect is the result of improper or abnormal use, your negligence, vehicle accident, improper or incorrect installation or maintenance, nor when the product has been repaired or altered in any way. QA1's liability in the case of defective products subject to the foregoing warranty shall be limited to the repair or replacement, at QA1's option, of the defective products. Consequential or incidental damages are not recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.