call
SMS
Cart
Product Overview
If you don't want your HD to set on the ground then this is the kit for you. The front is lowered 3" by using Calmax Control Arms, just remove and replace the factory arms! Your sporting urethane bushings and brand new all steel ball joints with a 3" drop where the factory spring rate in your torsion bars are retained and a factory ride is preserved. Ball joint angles and alignment are also set right!
Setting the rear in proper alignment with the front a 5" hanger / shackle kit is employed. The rear leaf spring is moved up on the frame using the brackets in the kit. To avoid an especially bad installation situation, take a peek at your factory leaf spring eye hangers and make sure they match the look of one of the pictures below! All the short / long bed HD trucks we've seen use the specified hangers but to make double dang sure you have the right parts, a quick inspection before you order can save you from finding out you don't have the right parts when you need them most!
Fits: Chevrolet Silverado 3500HD 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Features:
- Control arm drop for factory geometry
- Durable powder coated finish
- Twin-tube pivot sleeves for secure, bushing-friendly installation—ideal for all Chevy Silverado HD truck lowering kit applications.
- Ready to install – bushings and ball joints pre-installed
- Made in the USA
Includes:
- Lower control arms (2)
- Leaf spring hangers (2)
- Leaf spring shackles (2)
- Rear bump stop brackets (2)
- Rear bump stops (2)
- Front shocks (2)
- Rear shocks (2)
- Installation hardware
Note: Available for short and long bed trucks, but some trucks may use opposite hangers. Take a look at your factory hanger to make sure you are ordering the correct kit. Fits 2WD and 4WD trucks.
DJM Part Numbers
Long Bed - DJMEH2601-3/5
Short Bed - DJMEH2603-3/5
Brand (Manufacturer) Info
DJM is one of the original innovators of lowering full size trucks. With years of experience and expertise bringing sought after solutions to the market, you can count on DJM to have the lowering kit that you might not be able to find elsewhere. DJM parts and lowering kits are made in the USA and are something you can count on to get you safely down the road!
