800-928-1984
Cart
Product Overview
Level your truck the right way—with strength, geometry, and ride quality in mind. The Kryptonite Leveling Kits are built to get your front end aligned, raised, and reinforced—all while maintaining factory ride feel and component integrity. Kryptonite’s forged torsion keys are stronger than stock and allow for a precise 1–2” front lift. The Stage 2-4 kits also includes our boxed upper control arms, designed to correct suspension geometry and eliminate the limitations of stock arms. With pre-installed ball joints, bushings, and sleeves, install is straightforward and worry-free. The included shock extension brackets (Stage 1-2) retain your stock shocks, saving you money while maximizing travel. This is an ideal upgrade for work trucks, daily drivers, or anyone looking to safely run larger tires (up to 34") without committing to a full lift system.
Fits: Chevrolet Silverado 3500HD 2020, 2021, 2022, 2023, 2024, 2025
Features:
- Leveling Torsion Keys – Provides up to 2” of lift and allows clearance for up to 34” tires
- Shock Extensions – Allows use of stock-length shocks at leveled height (Stage 1-2)
- Boxed Arm Design – Laser-cut and TIG-welded for extreme strength and durability
- Made in the USA – Built with pride in small-town America and backed by Kryptonite’s lifetime warranty
- Bolt-On Upgrade – Compatible with stock or leveled 2500HD–3500HD trucks and many lift kits
- Upgraded Ball Joints Included – Includes Kryptonite bolt-on upper ball joints, pre-greased and ready to install
- Improved Ride & Alignment – Helps maintain factory geometry while improving strength and performance with added caster
- Pre-Greased with Chevron EP2 – Ready for installation; service every 5–7k miles
Includes:
- 1 x Kryptonite Upper Control Arm Pair
- 4 x Control Arm Sleeves
- 8 x Control Arm Bushings
- 2 x Upper Bump Stops
- 2 x Kryptonite Bolt-On Upper Ball Joints
- 1 x Hardware Package
- 2 x Leveling Torsion Keys
- 2 x Shock Extensions (Stage 1 & 2)
- 2 x Fox 2.0 Front Shocks (Stage 3)
- 2 x Fox 2.0 Rear Shocks (Stage 3)
- 2 x Fox 2.5 Front Shocks (Stage 4)
- 2 x Fox 2.5 Rear Shocks (Stage 4)
Notes: Stage 1 and 2 are designed to level the front of GM trucks a maximum of 2 inches, any adjustment beyond 2 inches over stock height will most likely result in complete front shock failure. Does not fit AT4X or ZR2 models with DSSV shocks.
Kryptonite Part Numbers:
Stage 1 - KR20STAGE1
Stage 2 - KR20STAGE2
Stage 3 (Fox 2.0) - KR20STAGE3FOX
Stage 4 (Fox 2.5) - KR20STAGE4FOX
Brand (Manufacturer) Info
