800-928-1984
Product Overview
Fits: Toyota Tundra 4wd w/ Factory Rear Air Bags 2022, 2023, 2024
Fabtech SKU # K7089DL
DESCRIPTION
TOYOTA TUNDRA 4WD [FACTORY REAR AIR BAGS]
Fabtech’s high quality Tundra lift kit offers increased height to run 33 inch or 35 inch tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance.
The factory Tundra upper control arms are replaced with Fabtech’s Uniball Upper Control Arms that provide an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires.
The Fabtech upper control arms are constructed of the finest material with .120" wall 1.25" OD 4130 Chromoly steel tubing. High quality 1" FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Tundra upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel.
The factory front Coilover shocks receive spacers that provide lift while keeping the stock ride quality. Rear lift is accomplished using a spacer under the factory air bags for the additional ride height. The rear shocks are replaced with Fabtech Performance twin tube shocks for a good rear ride quality.
This Tundra lift kit is an affordable suspension upgrade for enthusiasts that desire to run 33" or 35" tall tires with Fabtech quality and strength.
FEATURES
Arms eliminate the upper ball joint w/ super strong 1" ID Stainless American Uniball
Chromoly tubing reduces flex found in stock arms for more positive road feel
17-4 Stainless Steel Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle
Retains stock front Coilover shocks for a factory ride
Perfect system for the daily driver that wants increased clearance to run 33" or 35" tires
5 Year 60,000 Mile Powertrain Warranty
Kit Includes
DIRT LOGIC 2.25 SHOCK
Dirt Logic 2.25’s are designed to replace factory shocks with a larger, more robust configuration. The 2.25 size is what separates it from other replacement take apart shocks for a superior ride, both on and off road. Shocks are pretuned for each Fabtech suspension, accounting for larger tires, providing the finest all around damping.
2.25″ OD Stainless Steel Body
2.0″ OD Billet Aluminum Piston
7/8″ NitroSteel® Black Piston Rod
Polyurethane Mounting Ends
50mm OD Seamless Steel Body
46mm High Flow Piston for best ride
Vehicle specific valving designed for oversized tires
Full floating piston separates gas from oil for a consistent ride
14mm Nitrocarb piston rod resists rock chips and rusting
All black finish with raised nameplate as a signature of quality
TIRES & WHEELS
Use 33/12.50R18 tires w/ 18×9 wheels w/ 5” BS w/ minor trimming
Use 33/12.50R20 tires w/ 20×9 wheels w/ 5” BS w/ minor trimming
Use 35/12.50R18 tires w/ 18×9 wheels w/ 5” BS w/ cutting
Use 35/12.50R20 tires w/ 20×9 wheels w/ 5” BS w/ cutting
