Switch Suspension 2150 W. Broadway Rd. #102 Mesa, Az 85202
Phone: 800-928-1984
Hours: 8am-5pm Monday thru Friday
Closed on Saturday/Sunday

Cadillac Escalade (SWB) 2021-2024 Belltech 1"-4.5" Rear Coil Over Lowering Kit


Product Overview

Fits: Chevrolet Tahoe 2WD/4WD 2021, 2022, 2023, 2024

GMC Yukon 2WD/4WD 2021, 2022, 2023, 2024

Cadillac Escalade (Short Wheel Base) 2WD/4WD 2021, 2022, 2023, 2024

Belltech Part# 15013

If you are tired of stiff suspension and looking for an upgrade, Belltech's 15013 rear coilover kit is just right for you. This kit lowers the rear end of your 2021 Tahoe/Yukon 2WD/4WD SUV -1" to -4.5" and gives it superior ride quality. Your SUV will achieve outstanding handling with its new and improved lower center of gravity, taking turns, and making maneuvers quickly with reduced body roll and increased control. Our Belltech lowering coilovers feature our phenomenal Street Performance dampers with perfected pre-set damping, which are proven to give you a smoother, more even-feeling ride. The dampers are made of galvanized steel and zinc-plated for a rust-preventing finish. They showcase a large 60mm damper body that holds increased volumes of oil, 35mm independent rebound and compression valves, and a low-friction design. All these details work together to provide you with damping that does not fade. Our 20mm hardened chrome piston rods give the design increased strength and durability. To offer you a customizable ride height, our coilovers feature threaded bodies and an adjustable spring perch to set your ride height as desired. After customizing the height, it is important to adjust the bump stop engagement and we supply a progressive rate polymer, open-cell, bump stop, and packers to do just that. This coilover design uses a main spring and a helper spring. The helper spring keeps tension on the main spring when the suspension is at full droop, so it stays properly seated in place. Both are made of cold-formed, high tensile steel and powder-coated for longevity. To reduce noise and vibrations, we use a high durometer vulcanized rubber bushing. To keep the piston rod pristine and protect it from debris, we apply a plastic dust boot, and for easy installation, the OE top mount is used. Do not settle for lackluster suspension when you can have something so exceptional you will not want to leave the driver's seat.

  • Height adjustable -1" to -4.5"
  • 60mm damper body
  • 20mm hardened chrome piston rod
  • 35mm independent valves
  • Enhances ride quality
  • Lowers center of gravity and reduces body-roll
  • Perfected pre-set damping
  • Progressive rate polymer, open-cell, bump stop
  • Packers to perfect bump stop engagement
  • High tensile steel springs, powder coated for longevity
  • Easy installation
  • Street Performance dampers
  • 60mm damper body
  • Low-friction design
  • High-quality materials
  • High durometer vulcanized rubber bushing

NOTE: Does not fit Magneride or Adaptive Air Ride vehicles



Sign up for our newsletter to receive special offers and promotions