Switch Suspension 2150 W. Broadway Rd. #102 Mesa, Az 85202
Phone: 800-928-1984
Hours: 8am-5pm Monday thru Friday
Closed on Saturday/Sunday

Chevrolet / GMC C10, C15 Truck 1963-1987 Tubular Upper and Lower Control Arm Set

$1,168.05 - $1,178.48

Product Overview

Fits: Chevrolet / GMC C10, C15 Truck, Blazer, Jimmy, Suburban 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987 

Our 1973-87 Chevy and GMC truck tubular upper and lower control arm design helps to correct the camber and ball joint angle problems often found when using a drop spindle or lowered coil spring. We then designed an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and true. These arms come with factory early model cross shafts for ease of installation and increased ground clearance. Works with drop spindles. Corrects geometry for lowered applications. Requires use of aftermarket sway bar.

Kit includes:
2 upper control arms
2 lower control arms
Gloss Black powder coated
1.250" x .188" DOM tubing
4 cross shafts (installed)
2 lower ball joints (If applicable)
2 upper ball joints (If applicable)
Limited Lifetime Warranty
Sold in sets
Due to our improved design, these lower arms now require the use of our after market sway bar. This bar is also dimensionally the same as the Addco type offered by many retailers.
Manufactured in the USA 

Be Sure to select correct year for your vehicle, kit fits SUV Blazer, Jimmy, Suburban 1988, 1989, 1990, 1991 SQUARE BODY ONLY, 2wd Only


Sign up for our newsletter to receive special offers and promotions