Fits: Chevy/GMC C20 and C30 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, Suburban
Performance Online (POL) 1971-91 Chevy and GMC truck tubular upper and lower control arm design helps to correct the camber and ball joint angle problems often found when using a drop spindle or lowered coil spring. We then designed an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and true. These arms come with factory early model cross shafts for ease of installation and increased ground clearence. Works with drop spindles. Corrects geometry for lowered applications. Requires use of aftermarket sway bar.
2 upper control arms
2 lower control arms
Gloss Black powder coated
1.250" x .188" DOM tubing
4 cross shafts (installed)
2 lower ball joints (If applicable)
2 upper ball joints (If applicable)
Sold in sets
Due to our improved design, these lower arms now require the use of our after market sway bar. This bar is also dimensionally the same as the Addco type offered by many retailers.
Manufactured in the USA