call
SMS
Cart
Product Overview
Looking to get a clean and simple system? Here is what you need!
1965-1972 Ford and Mercury Fullsize cars look fantastic with that ultra low stance! This bolt-on system offers that using HQ Series Shockwaves up front along with air springs and HQ Shocks for the rear.
Fits: Ford Galaxie 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972
1965-1972 Ford and Mercury Fullsize cars look fantastic with that ultra low stance! This bolt-on system offers that using HQ Series Shockwaves up front along with air springs and HQ Shocks for the rear.
Fits: Ford Galaxie 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972
Features:
If you are looking to slam your Fullsize Ford or Mercury with quality, bolt-on components this system is the perfect solution. It includes front HQ Series Shockwaves, rear CoolRide, and rear HQ Series Shocks.
The Shockwave is the perfect design for replacing the front coil spring and shock. Inside the Firestone air spring is a rebound adjustable Fox mono-tube shock. Combining these two components into one solution prevents the need to relocate the shock!
The Rear CoolRide system includes application specific brackets to adapt the air spring to the factory coil spring mounts.
Adjustable bump stops are included for the rear to fine tune the stance.
No cutting, no welding, no fabrication, easy installation.
HQ Series front and rear shocks are manufactured by Fox and are rebound adjustable allowing them to be tuned to the ride quality and handling you want. They are a Mono-tube design with an aluminum body and carry a 1,000,001 Mile Warranty
Durable Firestone air springs provide height adjustability and a premium ride quality.
Fender Lip to Ground Dimensions on 1967 Galaxie
Tire Sizes – Front 215/60/17 (27.1″) – Rear 225/60/17 (27.6″)
Deflated – Front 24″ – Rear 24.5″
Ride Height – Front 27″ – Rear 27.5″
Fully Inflated – Front 28.25″ – Rear 30.5″
The Original "DLOE65" Manual Toggle Air Ride Valve. These Air Valves are The Answer to Your Air Management Needs. Four Valves (one per corner) Will Control Your Entire Vehicle Reliably. Valve Operation For Fill & Dump is Momentary. FILL/OFF/DUMP
If you are looking to slam your Fullsize Ford or Mercury with quality, bolt-on components this system is the perfect solution. It includes front HQ Series Shockwaves, rear CoolRide, and rear HQ Series Shocks.
The Shockwave is the perfect design for replacing the front coil spring and shock. Inside the Firestone air spring is a rebound adjustable Fox mono-tube shock. Combining these two components into one solution prevents the need to relocate the shock!
The Rear CoolRide system includes application specific brackets to adapt the air spring to the factory coil spring mounts.
Adjustable bump stops are included for the rear to fine tune the stance.
No cutting, no welding, no fabrication, easy installation.
HQ Series front and rear shocks are manufactured by Fox and are rebound adjustable allowing them to be tuned to the ride quality and handling you want. They are a Mono-tube design with an aluminum body and carry a 1,000,001 Mile Warranty
Durable Firestone air springs provide height adjustability and a premium ride quality.
Fender Lip to Ground Dimensions on 1967 Galaxie
Tire Sizes – Front 215/60/17 (27.1″) – Rear 225/60/17 (27.6″)
Deflated – Front 24″ – Rear 24.5″
Ride Height – Front 27″ – Rear 27.5″
Fully Inflated – Front 28.25″ – Rear 30.5″
The Original "DLOE65" Manual Toggle Air Ride Valve. These Air Valves are The Answer to Your Air Management Needs. Four Valves (one per corner) Will Control Your Entire Vehicle Reliably. Valve Operation For Fill & Dump is Momentary. FILL/OFF/DUMP
Includes:
Front Shockwaves
Rear Bags and Brackets
Rear Shocks
Seamless Aluminum 6x18
Viair 444C Compressor
Compressor Wire Kit
Viair 90221 pressure switch
(50ft) 1/4" Air Hose
(10ft) 3/8" Air Hose
(4) Manual Valves Valves
(1) Black Powder Coated Mounting Panel
(1) Tank Drain (VIA92835)
(1) 3/8npt x 1/8 Female Reducer Bushing (FIT28122)
(2) 3/8npt x 1/4 Female Reducer Bushings (FIT28116)
(1) 3/8npt x 3/8 hose Tube 90 (FIT109308022)
(1) Distribution fitting 3/8" PTC Inlet - 4 way 1/4" PTC outlet (SMCKV2UD0711)
(1) Accuair 3/8 PTC - 1/8 NPT Female Tee (pressure switch tee) (SMCKV2E1100)
(4) Straight 1/8 Male NPT to 1/4 OD Air line Fittings (FIT103104020)
(4) Elbow 1/8 Male NPT to 1/4 OD Air Line (FIT109104020)
Seamless Aluminum 6x18
Viair 444C Compressor
Compressor Wire Kit
Viair 90221 pressure switch
(50ft) 1/4" Air Hose
(10ft) 3/8" Air Hose
(4) Manual Valves Valves
(1) Black Powder Coated Mounting Panel
(1) Tank Drain (VIA92835)
(1) 3/8npt x 1/8 Female Reducer Bushing (FIT28122)
(2) 3/8npt x 1/4 Female Reducer Bushings (FIT28116)
(1) 3/8npt x 3/8 hose Tube 90 (FIT109308022)
(1) Distribution fitting 3/8" PTC Inlet - 4 way 1/4" PTC outlet (SMCKV2UD0711)
(1) Accuair 3/8 PTC - 1/8 NPT Female Tee (pressure switch tee) (SMCKV2E1100)
(4) Straight 1/8 Male NPT to 1/4 OD Air line Fittings (FIT103104020)
(4) Elbow 1/8 Male NPT to 1/4 OD Air Line (FIT109104020)
Brand (Manufacturer) Info
Since 2012, Switch Suspension has been giving the best of everything for anything that has wheels or has to do with wheels. Aside from superior quality brake, suspension, and steering upgrades, the company also has an installation facility and retail showroom in Mesa, Arizona.
Whatever your car or truck needs - upgrades, custom components, chassis, big brake kits, lowering kits, or suspension kits, Switch Suspension has it. Best of all, you can do your shopping online, right in the comforts of your home!