call
SMS
Cart
Product Overview
Switch Suspension has put together a great kit for your Thunderbird.
Get what you need in one shot.
Fits: Ford Thunderbird 1964, 1965, 1966
Features:
Get what you need in one shot.
Fits: Ford Thunderbird 1964, 1965, 1966
Features:
HQ Series ShockWaves® mount in your 1964-1966 Thunderbird just like Coil Overs and deliver great ride quality and handling with an adjustable air ride stance. RideTech’s patented, integral “shock-within-a-spring” air spring and shock absorber assembly is a proven winner at shows and in motion. The 24-position rebound adjustment helps you fine-tune the shocks to your driving preferences and vehicle demands. Advanced technology hides within the shocks. The monotube design features large 1.834″ pistons, heavy duty 5/8″ shafts, and impact-forged bodies. Since HQ Series ShockWaves® are built to perform and made to last, they are backed by RideTech’s exclusive 1,000,001 mile warranty. Shock calibrations and air spring specs are based on more than 20 years of extensive air ride development on the street, highways and race tracks. It all adds up to predictable handling comparable to Coil Overs but with instant ride height adjustment. You get the best of both worlds. This kit includes two front rebound adjustable HQ Series ShockWaves®.
This is our simplest, cost-effective, and easiest-to-install air ride system. There are a great number of finished vehicles out there that use a leaf spring rear suspension.
The AIRoverLeaf™ system offers a great ride quality and extra load capacity without re-engineering your vehicle. Lowering is accomplished by removing 1 or 2 leaf springs. The airspring is then inflated to restore load capacity, ride height and spring rate.
The AIRoverLeaf™ system is a completely bolt-on kit that comes with air springs and requires little or no modification to your vehicle.
Lowers vehicle ride height
Improves handling
Greatest application coverage and versatility
Pre-engineered mounting hardware to maintain ground clearance, driveline angles, tire clearance and load capacities
Improves ride quality!
Every good air suspension kit should have a high quality air tank to store the air produced by the air pumps. Most air tanks on the market are going to require you to run valves externally, meaning you will have more to deal with during install and more plumbing that will be visible. Our patented ENDO-VT™ valve integrated air tank provides a cleaner install by having the valves integrated into the air tank. This allows for quicker installs and an overall nicer presentation in your trunk, truck bed, or anywhere else you choose to mount your tank. The ENDO-VT also represents AccuAir’s next generation of solenoid valve technology that includes VFC™ (variable flow control) in addition to D.O.T. approved fully filtered and rebuildable FFPTC (fully-filtered push-to-connect) fittings.
AccuAir’s ENDO-Tank product line is the result of years of engineering accomplishments and represents the largest leap forward in air tank technology for 100 years. The system allows tanks to be built modularly with all precision machined aluminum components and with a bolted construction. As a result, these tanks are weld-free and leak-free. Ports are machined directly into the solid aluminum body and are flush with the outside of the tank. Modular construction allows the end-caps to be removed allowing for never before imagined feature combinations to go inside the tank. These tanks are offered in raw aluminum.
Includes:
Front Shockwaves
This is our simplest, cost-effective, and easiest-to-install air ride system. There are a great number of finished vehicles out there that use a leaf spring rear suspension.
The AIRoverLeaf™ system offers a great ride quality and extra load capacity without re-engineering your vehicle. Lowering is accomplished by removing 1 or 2 leaf springs. The airspring is then inflated to restore load capacity, ride height and spring rate.
The AIRoverLeaf™ system is a completely bolt-on kit that comes with air springs and requires little or no modification to your vehicle.
Lowers vehicle ride height
Improves handling
Greatest application coverage and versatility
Pre-engineered mounting hardware to maintain ground clearance, driveline angles, tire clearance and load capacities
Improves ride quality!
Every good air suspension kit should have a high quality air tank to store the air produced by the air pumps. Most air tanks on the market are going to require you to run valves externally, meaning you will have more to deal with during install and more plumbing that will be visible. Our patented ENDO-VT™ valve integrated air tank provides a cleaner install by having the valves integrated into the air tank. This allows for quicker installs and an overall nicer presentation in your trunk, truck bed, or anywhere else you choose to mount your tank. The ENDO-VT also represents AccuAir’s next generation of solenoid valve technology that includes VFC™ (variable flow control) in addition to D.O.T. approved fully filtered and rebuildable FFPTC (fully-filtered push-to-connect) fittings.
AccuAir’s ENDO-Tank product line is the result of years of engineering accomplishments and represents the largest leap forward in air tank technology for 100 years. The system allows tanks to be built modularly with all precision machined aluminum components and with a bolted construction. As a result, these tanks are weld-free and leak-free. Ports are machined directly into the solid aluminum body and are flush with the outside of the tank. Modular construction allows the end-caps to be removed allowing for never before imagined feature combinations to go inside the tank. These tanks are offered in raw aluminum.
Includes:
Front Shockwaves
Rear Bags and Brackets
Rear Shocks
Accuair ENDO-VT (Valve-Tank) 5 gallon AA-3642
AVS 7 Switch Controller
12ft Accuair Endo-VT Tank To AVS 7-switch Box Wiring Harness
Dual Compressor Wire Kit
Viair 444C Dual Pack Compressors
50ft of 3/8" Air Line
2 x Brass 1/4" Female NPT to 1/4" Male NPT Street Elbow (FIT28262)
Accuair ENDO-VT (Valve-Tank) 5 gallon AA-3642
AVS 7 Switch Controller
12ft Accuair Endo-VT Tank To AVS 7-switch Box Wiring Harness
Dual Compressor Wire Kit
Viair 444C Dual Pack Compressors
50ft of 3/8" Air Line
2 x Brass 1/4" Female NPT to 1/4" Male NPT Street Elbow (FIT28262)
Brand (Manufacturer) Info
Since 2012, Switch Suspension has been giving the best of everything for anything that has wheels or has to do with wheels. Aside from superior quality brake, suspension, and steering upgrades, the company also has an installation facility and retail showroom in Mesa, Arizona.
Whatever your car or truck needs - upgrades, custom components, chassis, big brake kits, lowering kits, or suspension kits, Switch Suspension has it. Best of all, you can do your shopping online, right in the comforts of your home!