800-928-1984
Product Overview
Fits Chevrolet and GMC C1500 Pickup 1988, 1989, 1990, 1991 ,1992, 1993, 1994, 1995, 1996, 1997, 1998
The new Stone Fab Rear coilover kit for the 1988-1998 C1500 trucks uses a tucked in front hanger mount which allows the use of straight lower link bars. These mount untilizing your existing front spring hanger location. The wishbone uses an upgraded johnny joint to be able to adjust the pinion angle and are rebuildable. This kit comes with a raised gas tank crossmember to allow for more ground clearance while retaining the factory fuel cell. You will need to slot the front holes to raise the front. The coil over mounts are made out of beefy 1/4" steel. This kit does require some welding for your coilover mounts and the raised crossmeber. With this kit you get your choice of coilover between Aldan American, QA1, and Ridetech. All of which are an outsanding option to compliment our rear kit. If you are wanting to retain the factory bed floor you would need to select the underbed notch option ,otherwise be ready to cut for the monster notch. You are able to run a max lip billet 12" wide if you narrow the rear axle 10" overall. Available in Raw or Black powder coat finish.
Includes:
- Tucked in front mount
- Straight lower link bars
- Raised gas tank crossmember
- Johnny joint wishbone
- Beefy 1/4" coilover mounts
- Choice of coilover
- Weld on mounts and hardware
Brand (Manufacturer) Info
Stone Fab has been at the forefront of custom air suspension, chassis design and fabrication for two decades and now they are bringing their experience to your project. Specializing in GM Fullsize products ranging from control arm kits, 3-Links, coilover conversions, steering & sway bar upgrades. Stone Fab has what you need to get low the right way. Static or bagged we've got you covered.
