Fits: Toyota Tundra 4wd w/ Factory Rear Air Bags 2022, 2023, 2024
Fabtech SKU # K7089
TOYOTA TUNDRA 4WD [FACTORY REAR AIR BAGS]
Fabtech’s high quality Tundra lift kit offers increased height to run 33 inch or 35 inch tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance.
The factory Tundra upper control arms are replaced with Fabtech’s Uniball Upper Control Arms that provide an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires.
The Fabtech upper control arms are constructed of the finest material with .120" wall 1.25" OD 4130 Chromoly steel tubing. High quality 1" FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without bind. These super stout Tundra upper control arms are designed for longevity in rugged offroad conditions while providing a more positive on road feel.
The factory front Coilover shocks receive spacers that provide lift while keeping the stock ride quality. Rear lift is accomplished using a spacer under the factory air bags for the additional ride height. The rear shocks are replaced with Fabtech Performance twin tube shocks for a good rear ride quality.
This Tundra lift kit is an affordable suspension upgrade for enthusiasts that desire to run 33" or 35" tall tires with Fabtech quality and strength.
Arms eliminate the upper ball joint w/ super strong 1" ID Stainless American Uniball
Chromoly tubing reduces flex found in stock arms for more positive road feel
17-4 Stainless Steel Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle
Retains stock front Coilover shocks for a factory ride
Perfect system for the daily driver that wants increased clearance to run 33" or 35" tires
5 Year 60,000 Mile Powertrain Warranty
PERFORMANCE TWIN TUBE REAR SHOCKS
Fabtech Performance Shocks have been designed to work in conjunction with each of our suspension systems, resulting in superior ride control. Features include high velocity 9-stage valving for excellent dampening capabilities and a closed cell insert to reduce shock fade at high speeds.
Twin Tube Hydraulic Construction
9/16″ Hardened Chrome Piston Rod
1 3/8″ OD Piston
Closed Cell Foam insert
High Flow 9 Stage Valving
TIRES & WHEELS
Use 33/12.50R18 tires w/ 18×9 wheels w/ 5” BS w/ minor trimming
Use 33/12.50R20 tires w/ 20×9 wheels w/ 5” BS w/ minor trimming
Use 35/12.50R18 tires w/ 18×9 wheels w/ 5” BS w/ cutting
Use 35/12.50R20 tires w/ 20×9 wheels w/ 5” BS w/ cutting